How to Root Galaxy Note N7100 2 Running on Official Android 4.1.2 ... - IBTimes.co.uk

How to Root Galaxy Note N7100 2 Running on Android 4.1.2 Official Firmware XXDME6 Jelly Bean

October

Samsung recently rolled its latest Jelly Bean Over-The-Air (OTA) update, Android 4.1.2 XXDME6, for Galaxy Note N7100 2 users in Europe. The OTA update addresses several bugs such as the Wi-Fi bug, fouled fixing date connectivity and heating issues of the Galaxy Note 2.

Those who have already

Their phone updated to the latest official firmware can now root The Same via CF-Root-Auto, using our step-by-step guide, courtesy of WCCFTech.

XXDME6 Android 4.1.2 Firmware Details

PDA: N7100XXDME6
CSC: N7100OXXDME2
Version: Android 4.1.2
Date: June, 2013
Regions: Austria, Belgium, France, Finland, Germany, Hungary, Italy, Norway, Spain, Sweden, United Kingdom

• FOLLOW IBTimes
• 

Key Points to Note

• XXDME6 official firmware and the instructions provided in this guide are applicable to the Galaxy Note N7100 2 model only. It will not work on any other device. Verify your device’s model number by navigating to Settings> About Phone.
• Back up important data and settings on the phone to avoid data loss while performing any tasks date wipe During or after firmware installation.
• Ensure the device is factory unlocked (not locked to a specific carrier) as well as its bootloader unlocked .
• the Verify that the correct USB drivers for the phone are installed on computer (download Galaxy Note N7100 2 USB drivers).
• Enable USB Debugging mode on the phone by navigating to Settings> Developer Options (if device is running Android 4.0 or later) or go to Settings> Applications> Development (if phone is running Android 2.3 or earlier). Otherwise if the phone is running Android 4.2, then do the Following:
• Go to Settings> About Phone
• Scroll down to the bottom and select Build Number
• Tap the Build Number seven times to unlock or reveal the hidden Developer Options under Settings. Then select the checkbox to enable USB Debugging mode under Settings> Developer Options.
• que Make sure the phone has at least 80% battery charge to Prevent unexpected device shutdown (due to battery drain) During firmware installation.
• Instructions provided in this guide are meant forreference purposeonly. IBTimes UK will not be held Liable if thedevice is damaged or bricked During or after the firmware installation. Users are advised to proceed at Their Own risk.

Downloads

• CF-Auto-Root is N7100XXDME6 Jelly Bean firmware
• Odin v3.07

How to Root Galaxy Note N7100 2 Running on Android 4.1.2 Official Firmware XXDME6 Jelly Bean

How to Root Galaxy Note N7100 2 Running on Android 4.1.2 Official Firmware XXDME6 Jelly Bean

Step 1 : Extract the firmware zip file to your computer desktop to get . tar.md5 file and some other files (optional).

Step 2 : Extract Odin zip file to obtain infor Odin3 v3.07.exe along with few other files.

Step 3 : Power off the phone and wait for vibration (about 5-6 seconds) to confirm complete shutdown device. Now boot the phone into Download Mode by pressing and holding Volume Down , Home and Power button together until the construction Android robot icon with a triangle Appears on screen. Then hit Volume Down button to enter Download Mode.

Step 4 : Launch Odin3 v3.07.exe you que Obtained in Step 2 as an Administrator , the Admin privileges are required to complete the firmware installation process smoothly.

Step 5 : Connect your phone to computer via USB cable. When the device successfully connects, a message saying “Added!” appears in ODIN and the ID: COM box will turn yellow Corresponding with the COM port number. If the message fails to Appear, try reinstalling the phone’s USB drivers or changing the port on the computer.

Step 6 : Choose the Following files from the extracted folder N7100XXDME6 que you Obtained in Step 1 by using respective checkboxes:

• Select the PDA checkbox, and click the ‘. tar.md5′ file
• Tap the Phone checkbox, and select the file named ‘modem’ (ignore if such file is not found)

Choose the

• CSC c heckbox, and click the file named ‘CSC’ (ignore if there is no such file)

Click the PIT

• checkbox, and choose the . ‘pit’ file (ignore if the file is missing)

Step 7 : In Odin, enable Auto Reboot and F. Reset Time options by Selecting the checkboxes. But the Re-Partition checkbox must be selected only if the . Pit file was chosen in the previous step in ODIN.

Step 8 : To Prevent ROM related errors, VERIFY Step 6 and Step 7 are done Correctly. Then hit the START button to begin flashing the firmware.

Step 9 : Once the firmware installation is complete, the phone will automatically reboot and soon PASS message with green background appears in the left-most box at the very top of Odin. Now it is safe to unplug the USB cable to disconnect the device from computer.

The Galaxy Note N7100 2 is now running on the latest Android 4.1.2 OTA firmware XXDME6 Jelly Bean. Go to Settings> About Phone to VERIFY the firmware installed.

Troubleshooting:

If the phone is stuck at boot animation or Samsung logo after Step 9, then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe Date / Factory Reset as well as Wipe Cache Partition before choosing reboot system now option. NOTE: Use Volume keys to navigate between options and Power key to select an option in recovery. Performing data wipe task will only erase your phone’s internal memory and not the date on SD card.

To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail:

This article is copyrighted by IBTimes.co.uk, the business news leader