Update Galaxy Note LTE N7105 2 to XXDMC3 Android 4.1.2 Jelly ... - WCCFtech

Samsung has come up with a new firmware for the Galaxy Note LTE N7105 2; XXDMC3 Jelly Bean Android 4.1.2 Official Firmware for users. The update includes various bug fixes and performance upgrades. While this update is available via KIES and it is recommended que you get it from there. If for some reason, you can not access the official update or would not like to wait and get it on your phone right now, here is a guide to update your Galaxy Note LTE N7105 2 to XXDMC3 Jelly Bean Android 4.1.2 Official Firmware.

Also, read: Guide to Root XXDMC3 Jelly Bean Android 4.1.2 on Galaxy Note LTE N7105 2

Disclaimer: This guide will be using ‘Odin’ to flash took them to the official firmware on your Galaxy Note LTE N7105 2. During the process, you might lose all your existing installed apps and personal settings. It is Therefore Necessary for you to follow the guide carefully. Also, please, mind the que this tutorial is only for Galaxy Note LTE N7105 2. Do not try this guide in any other Android device.

XXDMC3 Android 4.1.2 Firmware Details:

PDA: N7105XXDMC3
CSC: N7105COVDMC1
Version: 4.1.2
Date: April, 2013
Regions:

Download

1. N7105XXDMC3 Jelly Bean Android 4.1.2 for Galaxy Note LTE N7105 2
2. Odin 3:07

Update Galaxy Note LTE N7105 2 to XXDMC3 Jelly Bean Android 4.1.2 Official Firmware

1. Download and Extract N7105XXDMC3_N7105COVDMC1_COV.zip to get a file with. tar extension in the unzipped folder.
2. You will then extract Odin zip file to get Odin3 v3.07.exe.
3. Switch your phone off. Que and make sure you wait 5-6 seconds to confirm the complete power down cycle.
4. You will then put your 2 Galaxy Note LTE N7105 phone in Download Mode by pressing and holding down the Volume Down button, alongside the Home and Power button, until the screen flashes the Samsung Logo. After a few seconds of que, the phone will enter download mode.
5. Run Odin3 v3.07.exe with Administrator rights.
6. 2 Connect your Galaxy Note LTE N7105 with your PC. You will then see a notification Appear in Odin in the bottom left saying “Added!”. If for some reason, you see the not the said notification, try another USB port. If that too does not work, then reinstall the USB driver. Once you successfully see the “Added!” Notification in Odin, you are good to go. Also, check for COM port being depicted by the number in ‘yellow’ que to make sure you have successfully added your device.
Select
7. The Following Their files in Odin at respective tabs from extracted XXDMC3 firmware folder:
   • Click the ‘PDA’ button, and select the. tar file extracted in Step 1.
   • Click the ‘Phone’ button, and select file with * modem * in its name (Ignore, if this file does not exist file).
   • Click the ‘CSC’ Button, and select file with * csc * in its name (Ignore, if this file does not exist file).
   • Click the ‘PIT’ button, and select the. pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
   In
   • Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Please make sure que Re-Partition checkbox is selected, only if you are using a. Pit file.
8. Hit the ‘START’ button to begin the flashing process.
   Once the flashing process is completed, the phone will automatically reboot and you will see the ‘Green’ PASS notification in the top-left-most box. You can unplug the device from the computer now.

If you have

Followed every point described in the guide, your Galaxy Note LTE N7105 2 Should now be running Android 4.1.2 Jelly Bean build N7105XXDMC3. If there are any issues, feel free to post in the comments section for our staff to take a look at it.