Galaxy Note GT-N7100 2 Receives Official Android 4.1.2 XXDME1 ... - IBTimes.co.uk

2 Galaxy Note GT-N7100 Receives Official Android 4.1.2 Firmware XXDME1 Jelly Bean

October

Samsung recently rolled its latest Android 4.1.2 Jelly Bean XXDME1 official firmware for Galaxy Note GT-N7100 2 users in select countries including Indonesia, Thailand and several European countries. For some reason, if users are unable to receive Both Over-The-Air (OTA) update and manual update notifications over Samsung KIES, They can download and install The Same manually using ODIN with this guide.

XXDME1 Jelly Bean Android 4.1.2 Firmware Details

PDA : N7100XXDME1
CSC : N7100OLBDMD2
Version : 4.1.2
Date : May, 2013

NOTE: Given The instructions in this guide are meant for reference purpose only. IBTimes UK que reminds its readers it will not be held Liable if the device is damaged or bricked During or after firmware installation. Users are advised to proceed at Their Own risk.

Pre-Requisites

• XXDME1 The Jelly Bean official firmware and the instructions provided in this guide are applicable to the Galaxy Note GT-N7100 2 model only. It will not work on any other device. Verify the device model number by navigating to Settings> About Phone.
• Back up important data and settings on the phone including contacts, SMS, MMS, call log and APN settings. It is recommended que you back up data manually using one of the popular custom recovery tools such as ClockworkMod (CWM) or TWRP.
• Ensure the phone has at least 80% battery charge to Prevent unexpected device shutdown (due to battery drain) During the official firmware installation.
• Make sure USB Debugging mode is enabled on the phone by navigating to Settings> Developer Options (if phone is running Android 4.0 or later) or go to Settings> Applications> Development (if running Android 2.3 or earlier). NOTE: If this option is disabled, the file transfer process via USB cable will fail.

Both

• the Verify that the device’s carrier are unlocked and bootloader before Proceeding. Attempting to install the firmware on a locked device may completely damage or brick the device.
• Double check to see que the correct USB drivers are installed for the phone on computer (download 2 Galaxy Note GT-N7100 USB drivers).
• This tutorial uses ODIN flash tool for installing the firmware via Windows OS. However, Linux (Ubuntu) and Mac OS users Should Utility use CrossOver to run ODIN on Their system.
• Remember to run the ODIN Administrator in Windows OS (except Windows XP or lower do not require this). To do so, right-click on odin.exe first and then choose Run as Administrator in context menu.

How to Install Official XXDME1 Jelly Bean Android 4.1.2 Firmware on Galaxy Note GT-N7100 2

Follow us  

Step 1 : Download Android 4.1.2 official firmware XXDME1 Jelly Bean for Galaxy Note N7100 2 and Odin v3.07 on your computer.

Step 2 : Both Extract the downloaded zip files to the desired location on your desktop. The extracted files contain Should . Tar.md5 file, an Odin3 v3.07.exe file and some other files (optional).

Step 3 : Power off the phone and wait for the vibration (about 5 to 6 seconds) to confirm complete shutdown device. Then boot the phone into Download Mode by pressing and holding Volume Down , Home and Power buttons together until the construction Android robot icon with a triangle Appears on the screen. Finally, hit the Volume Up button again to enter Download Mode .

Step 4 : Launch Odin3 v3.07.exe you que Obtained in Step 2 as an Administrator , the Admin privileges are required to complete the firmware installation process smoothly.

Step 5 : Connect the phone to computer with USB cable. If the device successfully connects, a message reading “Added!” appears in Odin’s message box at the bottom left of the screen. If the message fails to Appear, then try another USB port (Preferably the one at the back of the computer). However, if all else fails, then just reinstall USB drivers for your phone on the computer. When the successful “Added!” message appears in Odin, proceed to the next step. At this point, the ID: COM will Indicate yellow Corresponding with the COM port number if your device is added successfully.

Step 6 : Choose the Following files from folder N7100XXDME1 que you while extracting Obtained in Step 2, using respective checkboxes:

• Choose the PDA checkbox, and select the ‘. tar.md5′ file.

Select the

• Phone checkbox, and choose the file named ‘Modem’ (ignore if the file is not found)

Click the CSC

• checkbox, and select the file named ‘CSC’ (ignore if there is no such file)

Choose the

• PIT checkbox, and click the ‘. pit’ file. (Ignore if such file is absent)

Step 8 : In Odin, enable Auto Reboot and F. Reset Time options by Selecting Their checkboxes. But, the Re-Partition checkbox must be selected, only if the . Was chosen pit file in the previous step.

Step 9 : Make sure everything Suggested in Step 7 and Step 8 is done Correctly. Then hit the START button to begin the flashing process.

Step 10 : Once the firmware installation is done, your phone will automatically reboot and soon PASS message with green background appears in the extreme left box at the very top of Odin. You can now safely remove the USB cable to disconnect your device from computer.

Your

2 Galaxy Note GT-N7100 is now running on Android 4.1.2 official firmware XXDME1 Jelly Bean. Go to Settings> About phone to VERIFY this firmware version installed.

Troubleshooting:

If your phone is stuck at boot animation or Samsung logo after Step 10, then boot the device into recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data / Factory Reset as well as Wipe Cache Partition before choosing reboot system now. NOTE: Use Volume keys to navigate between options and Power key to select an option in recovery. Remember que performing wiping function will erase your phone data on internal memory only and Does Not Affect the data stored in the phone’s SD card.

[Source: Droid Firmware]

To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail: