The LTE variant of Galaxy Note 3 (SM-N9005) recently received the new Android 4.4.2 build KitKat stock based on N9005XXUENB3. The latest firmware is available for users in Poland 3 Note via OTA update through Samsung Kies and.
Samsung
N9005XXUENB3 KitKat Android 4.4.2 update is available for Galaxy Note LTE 3.
Firmware details
PDA: N9005XXUENB3
CSC: N9005OXXENB1
MODEM: N9005XXUENB1
Version: Android 4.4.2
Build date: 8 February
Regions: Poland
Those users who failed to get the OTA update or, Unable to access the update via Samsung Kies server for being region-specific, may follow our step-by-step guide to install the update manually.
Note
que N9005XXUENB3 build is an unbranded version of firmware and can be installed on any unlocked SM-9005 unit, regardless of country and region.
IBTimes UK That It reminds its readers will not be held liable for any damage to the device. Before installing the official firmware, users are advised to VERIFY que Following Their devices meet requirements.
Pre-requisites
1) Install USB Drivers for Samsung Galaxy Note 3 to connect the Android device with the computer.
2) Enable USB Debugging Mode on phone to connect it with computer and use it with Android SDK. [Navigate to Settings >> About phone. Tap on Build Number several times until the message Appears saying 'You are now the Developer.' Now enable USB Debugging mode by navigating to Settings >> Developer Options .]
3) As the tutorial is Likely to wipe the phone of all data, create a backup. If the device is having any custom or recoveries such as CWM, then installed TWRP backup data using the recovery.
4) If the Android device powers off due to lack of battery while the installation process, It Could damage the device. Therefore, the Galaxy Note Should have above 80% battery charge.
5) The device Should be factory unlocked and not locked to a particular carrier.
6) The phone will lose custom ROM with the installation of official firmware. Additionally, the custom recovery will be Replaced by stock version.
7) The device will in the longer belong to a rooted version with the installation of official firmware.
8) Android 4.4 2 N9005XXUENB3 KitKat firmware works only with Samsung Galaxy Note LTE SM-3 9005. The flashing this on any other variant might brick the device, VERIFY of the model number Note 3 by navigating to Settings >> About phone >> Model number .
Download files
Android 4.4.2 N9005XXUENB3 KitKat [Alternative ]
Odin3 v3.07
How to Install Android 4.4.2 N9005XXUENB3 KitKat on Galaxy Note LTE 3 (SM-N9005)
Step-1: Extract the downloaded firmware zip winrar/7zip/winzip or using any extracting tool to get tar.md5 file with other files
Step-2: Extract Odin zip file to get Odin3 v3.07.exe
Step-3: Switch off Galaxy Note 3
Step-4: Boot the phone into Download Mode by pressing and holding Volume Down , Home and Power buttons together until the construction Android robot icon with a warning triangle Appears on the phone screen. Press the Volume Up button to continue to enter Download Mode
Step-5: Run Odin on computer as Administrator
Step-6: Note 3 Connect the USB cable to computer using while it is in Download mode. Wait for some team until Odin detects the device. When the phone is successfully connected an Added message will Appear under Odin. Also, the ID: COM box in Odin will turn blue with the COM port number, indicating successful connection
Note: If the Added message does not display then try re-installing drivers or, changing USB port on the computer
.
Step-7: Select these files extracted from N9005XXUENB3 folder to install on the phone
a) Click the PDA button and select the . tar.md5 file
b) Click the Phone button and select file with MODEM in its name
c) Click the CSC button and select file with CSC in its name
d) Click the PIT button and select the . pit file
Note: Ignore the last three steps (step-b, c and d) if such files to not exist
.
Step-8: Verify Auto Reboot and F.Reset Time checkboxes are selected in Odin. Uncheck Re-Partition option and select it Only When . Pit file is used
Step-9: Click the Start button in Odin to begin the installation process
Step-10: When the installation process is completed, the phone will automatically restart and soon PASS message with green background will Appear in the box at the extreme left very top of Odin. Unplug the USB cable from the phone to safely disconnect it from the computer
Galaxy Note 3 Should now be updated with Android 4.4.2 N9005XXUENB3 KitKat latest stock firmware. Head over to Settings >> About phone to VERIFY the new version running on the handset software.
How to Fix bootloop Issue
After flashing the firmware, if the Galaxy Note 3 gets stuck at boot animation or bootloop (after step-10), place the device into recovery mode by pressing and holding Volume Up , Home and Power buttons together.
In recovery mode, perform data wiping task by Selecting Wipe data / factory reset then select Wipe Cache Partition . Now reboot the phone by Selecting reboot system now . In recovery mode, use volume keys to scroll between options and Power button to select the Desired option. Note que performing wiping task will erase the phone’s internal memory data.
[Source: Honai of Android]
No comments:
Post a Comment